5FT Single LED Non Corrosive Strip Light With LED Tube – A quality non corrosive light fitting suitable for installation in a variety of environments. This fitting has an IP65 rating which means it is suitable for installation in damp or wet rooms / spaces. Also, the 5FT LED Tube is included for added peace of mind. These strip lights are a great choice if you’d like a fitting with replaceable tubes. Also, these tubes are available in 6400K Daylight, which is especially useful for car body repair shops for example.
5FT Single LED Non Corrosive Strip Light With LED Tube Fitting Specifications
- Voltage : 240V
- Lamp Type: T8
- Dimensions: Length: 1560mm | Width: 69mm | Depth: 78mm
- Colour: Grey
- Body: ABS Plastic | Polycarbonate Clear Diffuser
- Fixture Type: Direct to ceiling or using Jack Chain
- IP Rating: IP65
- Includes Plastic Clips for Diffuser (Stainless Steel Clips available; Sold Separately)
LED Tube Specifications
- Colours: Daylight White (6400K)
- Wattage: 22W
- Rated Voltage: 240V (AC)
- Line Frequency: 50-60Hz
- Lamp Base: T8
- Beam Angle: 120°
- Lifespan: 30,000 hours
- Ambient temperature: -20 °C to 40 °C
- CRI: >80
- Energy Class: A+
For further information on what an IP Rating is, please refer to this Information Page, which includes a chart showing all IP Ratings & what they mean.
Our in-house electrician recommends using 1.5mm x 3 Core Armoured Cable to wire this as a permanant installation or 1.5mm x 3 Core Black Flex Cable if the fitting is being installed in the house. To clean up the job, make sure to use CC5 Cable Cleats for the Armoured Cable or CCR7B Round Cable Clips for the flex cable.