RA Ignis White Tilt Fire Rated Downlights GU10 – a great addition to any modern home or place of business. Made from high quality pressed steel, these fittings include a tilt bezel, meaning the beam angle can be adjusted. These fittings also include fast fit terminal blocks which help make installing them easier. Standard ceiling spring clips are also included in the box. The 90 minute fire rating these downlights carry mean that they help prevent the spread of fire to adjoining structures and buildings for up to this amount of time.
RA Ignis White Tilt Fire Rated Downlights GU10 Specifications
- Cut out size: 75mm
- Front face size: 87mm
- Height: 95mm
- Weight: 0.26Kg
- Fast fit terminal block with heavy duty loop in/loop out lever type connectors
- Fire-rated for 30, 60 & 90 minutes to BS 476:20:1987 & BS 476:21:1987
- Built-in protection against the spread of fire & noise pollution
- Voltage: 240V (GU10) (transformer not required)
- Material: Pressed Steel
- Lamp Type: GU10
- IP Rating: IP20
Follow this link To view the full RA Ignis range
Electrical Top Tips
For installing these downlights into your ceiling, our on-site electrical engineer Stuart recommends using a Starrett 76mm Hole Saw for the holes to install the downlights into. Also, please remember that if you don’t already have one, you’ll require an A2 Arbor to attach the hole saw to a drill.
Further information about these fittings is available through the Data Sheet and for information on installation, check out the Instructions. For reference to the Building Fire Safety Regulations, please refer to the Governments Fire Safety: Approved Document B.
Also, please check out our full range of Fire Rated Downlights!