Forum Yate White Tilt Fire Rated Downlight GU10 – A great alternative / replacement to any older incandescent light fitting. With a flat fascia, these recessed light fittings sit flush against the ceiling, while looking good also creates a good seal to help with sound pollution. With a modern, contemporary design these fittings are perfectly-suited to any modern home. Also, these fittings are GU10, which means they can accept any lamp with a GU10 base, regardless of style or design. This also means they are compatible with both LED and regular halogen lamps.
Also, with the 90 minute fire rating, these downlights help stop the spread of fire and noise pollution.
Below is a list of specifications relating to these Forum Yate White Tilt Fire Rated Downlight GU10;
- 85mm Hole Cut Out Size
- 90 Minute Fire Rating
- Tilt function meaning the beam angle can be adjusted
- IP20 Rating which protects against steam generated moisture
- Suitable for homes with low ceiling
- Fascia colours available include white, satin nickel, black chrome and white
- Class 1
- 72mm cut-out size
- Fast fit connector box
- 0.3kg weight
Electrical Top Tips
Our in-house electrician David recommends using a 86mm hole saw to install these downlights. Please note that you will need an A2 Arbor to attach these to a drill.
For wiring these downlights to the mains, you will require a 1.5mm twin and earth cable. To clean up the install, you could use the CCF1.5G twin and earth cable clips too!
For information regarding electrical safety in home, remember to check out the Governement’s Part P Building Regulations.