RA Ignis Brushed Chrome Tilt Fire Rated Downlights GU10 – With a modern, contemporary design and sturdy pressed steel build, these downlights are perfect for a variety of installations. They also include an adjustable bezel, meaning you can adjust the beam angle to suit your preference. The 90 minute fire rating means these fittings will help prevent the spread of fire to adjoining structures and buildings for up to this amount of time. This helps people to vacate the premises quickly and safely during the event of a fire.
RA Ignis Brushed Chrome Tilt Fire Rated Downlights GU10 Specifications
- Cut out size: 75mm
- Front face size: 87mm
- Height: 95mm
- Weight: 0.26Kg
- Fast fit terminal block with heavy duty loop in/loop out lever type connectors
- Fire-rated for 30, 60 & 90 minutes to BS 476:20:1987 & BS 476:21:1987
- Built-in protection against the spread of fire & noise pollution
- Voltage: 240V (GU10) (transformer not required)
- Material: Pressed Steel
- Lamp Type: GU10
- IP Rating: IP20
Follow this link To view the full RA Ignis range
Electrical Top Tips
Paul, our on-site electrician, recommends using a Starrett 76mm Hole Saw for the holes to install the downlights into. Also, please remember that if you don’t already have one, you’ll require an A2 Arbor to attach the hole saw to a drill.
Further information about these fittings is available through the Data Sheet. Also, for further information on installing these downlights, check out the Instructions. For reference to the Building Fire Safety Regulations, please refer to the Governments Fire Safety: Approved Document B.