RA Ignis Brass Tilt Fire Rated Downlights GU10 – These recessed ceiling lights offer a wide range of features that make them a great choice for any modern home or place of business. These fittings have a fire rating of up to 90 minutes, meaning that they can stop the spread of fire to adjoining structures and buildings for that amount of time. Also, they include a short / shallow can on the rear, meaning they can be installed into shallow ceilings, soffits etc.
RA Ignis Brass Tilt Fire Rated Downlights GU10 Specifications
- Cut out size: 75mm
- Front face size: 87mm
- Height: 95mm
- Weight: 0.26Kg
- Fast fit terminal block with heavy duty loop in/loop out lever type connectors
- Fire-rated for 30, 60 & 90 minutes to BS 476:20:1987 & BS 476:21:1987
- Built-in protection against the spread of fire & noise pollution
- Voltage: 240V (GU10) (transformer not required)
- Material: Pressed Steel
- Lamp Type: GU10
- IP Rating: IP20
Follow this link To view the full RA Ignis range
Electrical Top Tips
Paul, our on-site electrician, recommends using a Starrett 76mm Hole Saw for the holes to install the downlights into. Also, please remember that if you don’t already have one, you’ll require an A2 Arbor to attach the hole saw to a drill.
Further information about these fittings is available through the Data Sheet. For reference to the Building Fire Safety Regulations, please refer to the Governments Fire Safety: Approved Document B. please visit our full range of Fire Rated Downlights!