5FT 50W LED Non Corrosive Temporary Site Light 110V – High quality 110V Temporary Non Corrosive Light fittings with an IP65 rating, meaning they’re waterproof and protected against dust and debris. Also, these fittings include a pre-fitted SMD LED Tray with 264 0.2W LED Chips, providing a bright and crisp light. These lights are primarily used on building sites & work sites as they’re hard-wearing and perfect for temporary lighting installations whilst work is being carried out. Due to the pre-installed LED Tray, LED Tubes are not required for these fittings.

5FT 50W LED Non Corrosive Temporary Site Light 110V Specifications

• Product Code: WGS550Y
• Wattage: 50W
• Lumen Output: 5000 lm
• Efficacy: 100 lm/W
• Colour Appearance (CCT): 4000K
• Frequency: 50/60Hz
• Colour Rendition (CRI): Ra > 80
• Driver Type: Fixed Output
• Colour Finish: Yellow
• Guarantee: 3 Years
• Voltage: 110-240V
• IP Rating: IP65
• IK Rating: IK07
• LED Life Expectancy: L80B50 30,000 Hours
• Power Factor: >0.9
• Working Temperature: -25°C to 40°C
• Electrical Class: Class I
• Approval: UKCA & CE

Electrical Top Tips

If you’re looking to connect more than one of these fittings to a 110V supply, Our on-site electrician Paul recommends using a 4 Way 110V Splitter, which will allow you to connect another three 110V temporary light fittings to the same supply. This is a great choice when using the light fittings on a work or building site.

Also, if you’re looking for further technical information regarding these fittings, please see the ‘Weatherguard 110V Fitting Spec Sheet‘. This will help you to make an informed purchase.